• SR1002S FTTx 1Ghz 2 Output Fiber Optical Node
  • Model Number: SR1002S
  • Brand: Softel
  • MOQ: 1 PCS
 

Quick Detail:

●Brand Name: Softel
●Model Number: SR1002S(SNMP)
●Item Name: SR1002S 1Ghz 2 Way Optical Receiver
●Frequency Range: 45~862/1003Mhz
●Optical Input Range: -9~+2
●Wavelength: 1100 ~ 1600 or 1530 ~ 1620nm
●Connector Type: FC/APC, SC/APC or Customized
●Fiber Type: Single mode
●Optical Return Loss: ≥45dB
●Power Voltage: DC12V/1A
●SNMP: Optional
●Optic Node Dimension: 142(L)x79(W)x36(H)


Description:


SR1002S optical receiver is our latest 1GHz FTTB optical receiver. With wide range receiving optical power, high output level and low power consumption.
It is an ideal equipment to build the high-performance NGB network.

There are three models optional:
SR1002SNC: The RFTV operating wavelength is 1100 ~ 1620nm.
SR1002SWF: Built-in channel filter, the RFTV operating wavelength is 1550nm.
SR1002SWD: Built-in CWDM, RFTV operating wavelength is 1550nm. Pass 1310/1490nm wavelength. Can connect EPON, GPON and
ONU.

●Adopt advanced optical AGC control technique, the maximum AGC control range (adjustable) is -9~+2dBm;
●RF amplifier part adopts the high performance low power consumption GaAs chip, the highest output level up to 114dBuv;
●EQ and ATT both use the professional electric control circuit, make the control more accurate, operation more convenient;
●Built-in the Chinese standard II class network management responder, support remote network management (optional);
●Compact structure, convenient installation, is the first choice equipment of FTTB CATV network;
●External high reliability low power consumption power supply;


Specification:

Item

Unit

Technical Parameters

Optical  Parameters

Receiving Optical Power

dBm

-9 ~ +2

Optical Return Loss

dB

>45

Optical Receiving Wavelength

nm

1100 ~ 1600 or 1530 ~ 1620

Optical Connector Type

 

SC/APC

Fiber Type

 

Single mode

Link  Parameters

C/N

dB

≥ 51

Note 1

C/CTB

dB

≥ 60

C/CSO

dB

≥ 60

RF  Parameters

Frequency Range

MHz

45 ~862/1003

Flatness in Band

dB

±0.75

Rated Output Level

dBμV

108 (FZ110 configuration, 
with 8dB tilt output)

104 (Two-way splitter, 
with 8dB tilt output)

Max Output Level

dBμV

114(-7 ~ +2 tap configuration)

110 (-7 ~ +2 two-way splitter)

Output Return Loss

dB

≥16

Output Impedance

Ω

75

Electrical control EQ range

dB

0~15

Electrical control ATT range

dB

0~15

General Characteristics

Power Voltage

V

DC12V/1A

Operating Temperature

-40~60

Consumption

VA

≤8

Dimension

 mm 

142(L)* 79(W)* 36(H)

Note 1: Configure 59 PAL-D analog channel signals in the 550MHz frequency range. 
Transmit digital signal 
in the frequency range of1550~862/1003MHz.
The digital signal level (in 8 MHz bandwidth) is 
10dB lower than analog signal carrier level. 
When the input optical power of the optical receiver is 
-1dBm, the output level: 108dBμV, EQ: 8dB.