• ONU-4FE-DRF EPON 4FE+1RF ONU
  • Model Number: ONU-4FE-DRF
  • Brand: SOFTEL
  • MOQ: 1 PCS
 

Quick Detail:

 

The ONU is designed mainly for FTTH use and FTTO use as well. It support 1000Base-PX10/PX20 standard with 1:64/1:32 maximum optical splitting ratio and 10/20km distance, and provide 1uplink GE PON port.

It work together with OLT could realize flexible network structure and maintenance and provide total FTTx solutions.

It built in CATV Receiver to realize the analog or DVB TV signals transmission.

It adopts single fiber WDM technology with downlink wavelength 1490nm, uplink wavelength 1310nm .It only needs one-core fiber to transmit data service. It also have a HFC optical port, received the CATV optical signals and convert into electric CATV signals.

ONU-4FE-DRF has 1 PON port , 1 HFC optical port, four10/100BASE-T ports and one CATV output.
Description:

n In compliant with IEEE802.3ah Standard and CTC2.1

n Up to 20KM transmission Distance

n Support VLAN and IGMP

n Support port isolation between different ports

n Integrated OAM remote configuration and maintenance function

n Plug and play, integrated auto detecting, auto configuration, and auto firmware upgrade technology

n EMS network management based on SNMP ,convenient for maintenance

n Full speed non-blocking switching.

n Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc.

n Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.

n Support auto polarity detection of Ethernet ports (AUTO MDIX).

n Integrated IEEE802.1p QoS with four level priority queues.

n Support IPv4 IGMP snooping and IPv6 MLD snooping.
 

 CATV Service Functions
 

n Turn on/off RF output remotely

n Wavelength:1550 +/- 10nm

n Optical return loss:>45dB

n Input opticl power:-8dBm~+2dBm

n RF frenquency:47MHz~875MHz

n RF output lever:75~80dBuV

n CNR:>46dB,CSO: >58dBc,CTB:  >58dBc

n RF output return loss: >14dB

n RF impedance: 75Ohm

AGC function optiona


 

Specification:

 

 

Item

Parameter

Interface

Uplink Interface

PON Interface:

1 GEPON optical interface
Meet 1000BASE-PX20 standard
Symmetric 1.25Gbps upstream/downstream
SC single-mode fiber
split ratio: 1:64
Transmission distance 20KM @ split ratio<1:32

CATV Interface:

1 HFC Optical input

SC/APC

User Interface

4*10/100Mauto-negotiation
Full/half duplex mode
RJ45 connector
Auto MDI/MDI-X
100m distance

1 RF output

Female F-Type Connector

Power Interface

12V DC Power supply

An external 12V 0.5A AC/DC power supplyadapter

Performance Parameters

PON

Optical

Parameter

Wavelength: Tx 1310nm, Rx1490nm
Tx Optical Power: -14dBm
Rx Sensitivity: -24dBm
Saturation Optical Power: -3dBm
Connector Type: SC
Optical Fiber: 9/125ɥm single-mode fiber

Data Transmission
Parameter

PON Throughput: Downstream 950Mbps; Upstream 930Mbps
Ethernet: 100Mbps
Packet Loss Ratio: <1*10E-12
latency: <1.5ms

Business
Capability

Layer 2 wire speed switching

Support VLAN TAG/UNTAGVLAN conversion

Support Port-based speed limitation

Support Priority classification

Support storm control of broadcast

Support RSTP

Network Management

Management

Mode

Support IEEE802.3 QAM, ONU can be remotely managed by OLT

Support Remote management through SNMP and Telnet

Local management

Management
Function

Status monitor, Configuration management, Alarm management,
Log management

Indicator

LED Indicator

 PWR, SYS,PON, LAN1~LAN4, CATV

Physical Features

Shell

Plastic casing

Power

External 12V 0.5A AC/DC power supply adapter

Power consumption: < 3W

Dimension and Weight

Item Dimension200mm(L) x 140mm(W) x 28mm (H)

Item weight0.35kg

Environmental
Specifications

Operating temperature: 0 to 50ºC
Storage temperature: -40 to 85ºC
Operating humidity: 10% to 90%(Non-condensing)
Storage humidity: 5% to 95%(Non-condensing)