SPECIFICATION
Introduction:
SOFTEL Outdoor GPON OLT OLTO-G8V-EDFA It is composed of preamplifier EDFA module, OLT module and optical splitter, etc. It is an optical node device that
organically combines CATV optical amplifier module and OLT module.Its modular design can be flexibly deployed in floor boxes, corridors, poles and other scenarios,
simplifying network design and reducing engineering costs.
Item | OLTO-G8V-EDFA |
Backplane Bandwidth (Gbps) | 104 |
Port Forwarding Rate(Mpps) | 65.472 |
GPON Module |
Chassis | Rack | 1U 19Inch Standard Box |
GE/10GE Uplink Port | QTY | 5 |
RJ45(GE) | 1 |
SFP(GE) | 2 |
SFP+(10GE) | 2 |
GPON Port | QTY | 8 |
Physical Interface | SFP Slots |
Connector Type | Class (Class C++/Class C+++) |
Max splitting ratio | 1:128 |
Management Ports | 1*10/100BASE-T out-band port, 1*CONSOLE port |
PON Port Specification (Class C+++module) | Transmission Distance | 20KM |
GPON port speed | Upstream 1.244Gbps, Downstream 2.488Gbps |
Wavelength | TX 1490nm, RX 1310nm |
Connector | SC/UPC |
Fiber Type | 9/125μm SMF |
TX Power | +4.5~+10dBm |
Rx Sensitivity | -30dBm |
Saturation Optical Power | -12dBm |
EDFA Optical Amplifier Module |
Working wavelength | 1535nm-1565nm |
Input optical power | -3dBm-+10dBm(ACC Mode) / -6dBm-+10dBm(APC Mode) |
Output optical power | 13 dBm -22dBm |
Output optical power stability | ≤±0.25dB |
Noise figure | ≤5.0dB(@Input optical power is +3dBm) |
Input /output reflection loss | ≥45dB |
Input/output pump light leakage | ≤-30dBm |
C/CTB | ≥63dB | EDFA input optical power is 3dBm,and the optical link composed of optical transmitter and receiver is tested. |
C/CSO | ≥62dB |
C/N | ≥50dB |
V1600G1WEO-PWR | AC:90~264V, 47/63Hz, 24V DC output, Dual Power Module Supply |
Management Mode | WEB/SNMP/Telnet/CLI/SSHv2 |