SPECIFICATION

EOS-204 EoC Slave

EOS-204 is the EOC slave based on HomePlug AV solution for Ethernet access over coax.  It works together with EOC master which is based on
HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service
based on the existing coax cable networking.

EOS-204 is based the Qualcomm chipset solution，with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used
for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable
without interference. The PHY Layer speed is 600Mbps,the MAC Layer throughput is up to 320Mpbs.

Features:

Based on HomePlug AV solution and Qualcomm chipset

7.5-65Mhz frequency for EOC signals., no influence on CATV Service

PHY Layer speed 600Mbps

Support data encryption

4 100M auto-negotiation Ethernet port

Support the isolation of slave under one master

Support Port-based VLAN and 802.1q VLAN

Support bandwidth limited

Support QOS configuration based on slave port or VLAN.

Support broadcast storm control.

Support data packages count

Automatically distribute configurations to newly connected slaves, available to use as soon as correctly connected and power on.

Support WEB,CLI and SNMP management

Support on-line upgrading

Specification