• Model Number: ONT-2GE-V-RFDW
  • Brand: SOFTEL
  • MOQ: 1

 Product OverView

2GE+1POTS+WiFi+CATV GPON/EPON HGU WiFi Mesh terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators. These boxes are based on the mature Chipset (Realtek) technology, which have high ratio of performance to price, and the technology of IEEE802.11b/g/n/ac WiFi, Layer 2/3, Wi-Fi EasyMesh,and high quality VoIP as well. Support full management of HGU devices through SOFTEL OLT. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah,ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.

 Technical parameters


Technical item




PON interface

1 G/EPON port(EPON PX20+ and GPON Class B+) Receiving sensitivity: ≤-28dBm

Transmitting optical power: 0~+4dBm

Transmission distance: 20KM


Tx1310nm,Rx 1490nm

Optical interface

SC/UPC connector


LAN interface

2*10/100/1000Mbps auto adaptive Ethernet interfaces, Full/Half, RJ45


USB interface

USB 3.0, Transmission Rate: 4.8Gbps




CATV interface

Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz Optical power input range: 0~-3dBm

RF output impedance: 75Ω

RF output level: 50~60dBuV(0~-3dBm optical input) MER: ≥32dB(-3dBm optical input)


POTS interface

1*RJ11 connectors

G.711A/G.711U/G.723/G.729 Codec,T.30/T.38/G.711 Fax mode, DTMF Relay




WiFi interface

Compliant with IEEE802.11b/g/n/ac

2.4GHz Operating frequency: 2.400-2.483GHz (WiFi 4) 5.0GHz Operating frequency: 5.150-5.825GHz (WiFi 5 wave 2)

WiFi:4*4 MIMO,,5dBi antenna, rate up to 1.167Gbps,Multiple SSID

TX power: 11n--22dBm/11ac--24dBm


5, For Status of PON/LOS, WiFi,TEL,LAN1,LAN2


Operating Enviroment

Temperature: 0℃~+50℃

Humidity: 10%~90%(non-condensing)


Storing Enviroment

Temperature: -30℃~+60℃

Humidity: 10%~90%(non-condensing)

Power Supply

DC 12V/1.5A,12W



Net weight










The device is powered up



The device is powered




Green is registered to the

PON system

Green is registering to the PON system

Device is not registered to

the PON system



Device does not receive

optical signals



Device have received

optical signals






Port is connected properly


Port is Sending/Receiving Data

The subscriber network cable is not plugged tightly or the port connection is

incorrect or no connection.

WiFi (2.4G/5Ghz)


WiFi Turn On

WiFi Turn On with ongoing data transmission

Devide is Power Off or WiFi Turn Off



Device has registered to

Soft-switch,No Data transmission

Phone hooks off or the port

is with ongoing data transmission

Device is power off or not registered to the





1550nm wavelength power of input is in.


1550nm wavelength power of input is too high.

1550nm wavelength power

of input is too low or no input.


USB device is connected

Ongoing data transmission

USB device isn’t connected

Table 3 Panel lights on


 Interface description


Port Type



Connect PON port with internet by SC/APC type, single mode optical fiber cable.

LAN 1/2

Connect device with ethernet port by RJ-45 cat5 cable.

RST Button

Press down reset button and keep about 5seconds to make the device restart and

recover from the factory default settings.

Pair Button

Press down WLAN Pair button to begin pairing.

WIFI Button

WLAN on/off.


Connect with power adapter.


Software function

Table 4 Interface description




Management Mode

OAM/OMCI,Telnet,WEB,TR069,Support full management by VSOL OLT






Data Service Functions

Full speed non-blocking switching 2K MAC address table

64 full range VLAN ID

Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc Support auto polarity detection of Ethernet ports (AUTO MDIX) Integrated IEEE802.1p QoS with four level priority queues

Support IGMP v1/v2/v3 snooping/proxy and MLD v1/v2 snooping/proxy Support bridge, router and bridge/router mixed mode

IP address assignment: dynamic PPPoE/DHCP Client and static IP



WiFi Service Functions

Integrated 802.11b/g/n/ac(WIFI5), support Easymesh protocol. Support max 128 users.

Authentication : WEP/WAP-PSK(TKIP)/WAP2-PSK(AES) Modulation type: DSSS,CCK and OFDM

Encoding scheme: BPSK,QPSK,16QAM and 64QAM






POTS Service Function

SIP protocol(IMS compatible) seamless compatible with all popular call agent Integrate heartbeat function and support active/standby call agent

Voice coding: ITU-T G.711/G.722/G.729, auto-negotiate with call agent

Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128ms tail length Support high/low speed fax, bypass fax, and T.38 fax

Support high speed MODEM(56Kbps) dial access

Support RFC2833 and redundant RFC2833, difference rings, MD5 authentication call forward, call waiting, hot-line call, alarm clock, and all kinds of value-adde  voice service

Call loss less than 0.01%