SHP200D 10G IP QAM processor
Model Number : SHP200D 10G IP QAM processor
Brand : SOFTEL
MOQ : 1
| Send Inquiry |
|
Model Number : SHP200D 10G IP QAM processor
Brand : SOFTEL
MOQ : 1
| Send Inquiry |
|
Product Overview
SHP200D 10G IP QAM processor is an all-in-one device developed by SOFTEL
which integrates multiplexer, scrambler and modulator in one body with maximum
112 DVB-C QAM channels output. With 10G switch built in, it can process 10G
optical signal to work as a traditional QAM modulator.
This processor is equipped with 2 card slots to load 32ch or 48ch or 64ch QAM card.
Its high density helps operators to save cost to the most extent.
Key Features
- Support 3 SFP+ (10G)/SFP(1G) ports and 2 GE ports input & output from the front panel,
or RJ45 GE ports input & output from daughter cards (32/48QAM)
- High density, modularized plug-in design, 1U chassis with max 2 QAM cards
- Support multiplexer and scrambler with 6 CAS Simul-cryption
- Maximum 112 non-adjacent QAM carriers output
- Supports accurate PCR adjusting/CA filtering, PID remapping and PSI/SI editing
- Web-based Network management
Input | Input from Front Panel | Max 512 IP in per card through SFP+/SFP ports 1-3 and 2 GE ports | ||
Input from Daughter Card | 2*512 IP in from 2 GE ports (SFP port optional)--32/48 QAM | |||
Transmission Rate | Max 9600Mbps for each 10G SFP+/SFP input | |||
Transport Protocol | TS over UDP/RTP, unicast and multicast, IGMP V2/V3 | |||
Mux | Max PIDs Remapping | 256 per output channel | ||
Functions | PID remapping (auto/manually optional) | |||
PCR accurate adjusting | ||||
PSI/SI table automatically generating | ||||
Scrambling | Max simulcrypt CA | 6 | ||
Scramble Standard | ETR289, ETSI 101 197, ETSI 103 197 | |||
Connection | Local/remote connection | |||
Modulation | Modulation Standard | EN300 429/ITU-T J.83A/B/C | ||
Constellation | J.83A | Constellation :16/32/64/128/256QAM | ||
Bandwidth :8M | ||||
J.83B/C | Constellation :64/256QAM | |||
Bandwidth :6M | ||||
QAM Channel | 32/48/64/96/112 non-adjacent carriers output, 384Mbps bandwidth for each RF port | |||
Symbol Rate | 3600~7000Ksps, 1ksps stepping 5057Ksps (J.83B, 64QAM) ; 5361Ksps (J.83B, 256QAM) | |||
Constellation | 16, 32, 64, 128, 256QAM | |||
FEC | RS (204, 188) | |||
RF Output | Interface (per card) | 1 or 2 F type output ports for 32/48/64 carriers card, 75Ω. 32ch qam card : all Carrier out thru one RF port 32ch/48ch qam card : Carrier 1~16/1~24 out thru RF1, 17~32/25~48 thru RF2 64ch qam card : Carrier 1~32 out thru RF1, 33~64 thru RF2 | ||
RF Range | 50~960MHz, 1kHz stepping | |||
Output Level | -20dBm~+10dBm(87~117dbµV), 0.1dB stepping | |||
MER | ≥ 40dB | |||
TS output | Per Daughter QAM Card | 32/48/64 IP output over UDP/RTP/RTSP, unicast/multicast, through SFP+/SFP ports 1-3 or GE ports RJ45 | ||
System | Web-based Network management | |||
General | Dimension | 420mm×440mm×44.5mm (WxLxH) | ||
Temperature | 0~45℃(operation), -20~80℃(storage) | |||
Power Supply | AC 100V±10%, 50/60Hz ; or AC 220V±10%, 50/60Hz | |||
Consumption | 50W(1 daughter QAM card)/75W(2 daughter QAM cards) | |||
