Optical Platform OLTX-2001 Series

SPECIFICATION

I.Overview

OLTX-2001 CATV optical platform is an integrated communication platform developed to adapt to the development of modern HFC MAN, which is specially designed to meet the requirements of intensive installation of equipment in the head-end of MAN. According to the modular design concept of communication equipment, the platform is designed with two power supply modules and 18 function modules in a standard chassis of 19 "4RU, and an intelligent and centralized monitoring unit is provided. The platform is featured in convenient installation and flexible configuration; The powerful intelligent centralized status monitoring unit can monitor the operating parameters of each module in the chassis in real time, and realize automatic audible and visual alarm in case of sudden failure; The dual power supply hot standby structure, together with the temperature control system controlled by the intelligent processor, effectively improves the reliability and stability of the system. The optical communication platform is equipped with a network management transponder that conforms to the national standard. It can easily realize centralized monitoring of network management through Ethernet. It is the preferred product for building a high-performance HFC MAN broadband network.

    Installation

Normally, in order to avoid damage to the equipment due to collision during transportation, the power supply module equipped with the chassis will be packaged separately and reinstalled in the corresponding slot. Rotate the bolts on both sides of the main control panel counterclockwise to make it pop out. Pull out the main control module to expose the left and right power supply installation slots. Take the front panel of the power supply module and gently move it along the corresponding slot guide rails. Push it to the bottom (operate in the direction shown on the power label), and then tighten the power supply locking screw on the rear panel of the chassis by screwdriver. After installing the power supply, insert the main control module back into its original position and tighten the bolts clockwise. 

Functional Module Installation

Align the functional modules of the optical platform from the front of the chassis with the guide rails of the slots to be installed on the optical platform and gently push in, then fix them on the chassis with the fastening screws on the modules.

Features

2.1.1 Dual Power supply: Built-in dual power supply, when adding modules, it does not need to turn off the system power supply, automatic switching, which ensure the continuous operation of the whole system to the greatest extent.

2.1.2 High Intelligence: It can automatically identify the module model on each slot. It provides a friendly human-computer interface, simple operation, which fully embodies the modern design concept of industrial equipment humanization.

2.1.3 Full Auto Temp Control: Full-automatic temperature control case, the unique cooling air duct, cooling slot design and original high-power frequency modulation intelligent fans are used to ensure the excellent cooling performance. The fans support online replacement, which improves the reliability of the whole system.

2.1.4 Sufficient Power Supply Space: Only one power supply can meet the requirements of the whole chassis, and at the same time, dual power supply hot standby is provided.

2.1.5 Display and Alarm: LCD displays the centralized monitoring unit adopts a powerful 32-bit processor, large-scale lattice display screen, all modules are controlled by microprocessor, and communicate with the main control module through the serial bus, the display screen directly displays the working status of each application module and power supply in real time, and the module has an independent temperature indication function.

2.1.6 Strong Network Compatibility: Ethernet follows 10BASE-T / 100BASE-TX IEEE-802.3, automatic MDI / MDI-X cross, can adapt to various switches.

2.1.7 Comprehensive Network Management Functions: Standard RJ45 interface is provided, supporting remote network management of WEB, It follows system interface of SCTE HMS network management standard and IEC international network management standard, to realizes local or remote intelligent management of application module and power supply.

2.1.8 High Integration Design: Standard 19”4RU chassis, compact structure design, high-density configuration plug-in, which save the space of the equipment occupied.

2.1.9 Flexible Configuration: Component plug-in system with standard slots, it has great configuration flexibility and can meet the needs of multiple applications.